Récemment, vous pouvez difficilement passer une journée sans tomber sur des autocollants muraux sympas, des transferts de t-shirts, des puzzles à scie sauteuse et des cartes de mariage et de cadeaux maison. Grâce à la puissance du Cricut Maker, vous pouvez également créer toutes ces choses fantastiques.
Utiliser une machine Cricut Maker pour la première fois peut être une sacrée tâche. Vous pouvez vous sentir intimidé lors du démarrage de votre premier projet. La bonne chose est que vous n'êtes pas seul car presque tout le monde commence au même point avant de devenir professionnel. Sans dire grand-chose, voici des idées pour vous aider à vous lancer dans l'art.
1. Connectez correctement la machine
Si vous êtes le débutant, vous devez lier le fabricant Cricut à votre ordinateur personnel pour commencer. Une chose fantastique est qu'avec la configuration correcte, la machine s'enregistre automatiquement sur votre compte. Il vous suffit de brancher le Cricut Maker sur une prise murale et de le mettre sous tension. Ensuite, connectez-le à votre PC à l'aide d'un câble USB. Vous pouvez également jumeler les deux en utilisant Bluetooth, surtout si vous utilisez un Mac.
Une fois le lien établi, recherchez le site Cricut Maker et suivez les invites à l'écran. Ces invites à l'écran devraient vous aider à trouver un ID Cricut. Vous devrez peut-être installer le plug-in d'espace de conception pour la première fois. Une fois que vous êtes prêt, vous serez invité à commencer à travailler sur le tout premier projet.
2. Commencez par des projets prêts à l'emploi
Souvent, certaines personnes acquièrent la machine Cricut dans le but de proposer des arts muraux de fantaisie et des tatouages sympas. Eh bien, ce sont parmi les nombreuses choses que vous pouvez créer en utilisant l'outil. Avant de commencer, il serait préférable que vous vous familiarisiez avec l'appareil. Pour ce faire, vous pouvez avec les projets prêts à l'emploi. Je recommanderais des articles tels que des cartes LOVE utilisant des matériaux en noir et blanc.
Lors de la création de telles cartes, il est très facile de vous familiariser avec la machine de découpe, ce qui est essentiel. Une autre chose, le papier cartonné que vous utilisez pour ces projets simples est facile à trouver et abordable. Vous vous rendrez compte qu'avant d'avoir terminé le cinquième projet, par exemple, vos mains seront utilisées pour la machine nouvellement acquise.
Avec le temps, vous serez prêt à reprendre les grands projets de votre choix. Grâce à Youtube, aujourd'hui, vous pouvez trouver presque tous les tutoriels concernant un projet que vous avez l'intention de poursuivre. Vous pouvez donc vous y rendre et profiter des clips fournis par différents YouTubers.
3. Préparez vos outils
Tous les travaux de conception et autres éléments nécessitent les bons outils et matériaux. Vous devez vous assurer que vous avez le bon approvisionnement en objets tels que spatule, raclette et pince à épiler, par exemple. Une chose à propos de la disponibilité de ces outils est que cela rend votre travail beaucoup plus confortable et rapide.
Par conséquent, si vous avez hâte de créer des projets comme un pro, vous devez vous assurer que tous les outils sont en place. Eh bien, Cricut Maker a des outils uniques prêts à l'emploi, et donc cela ne devrait pas être un gros problème pour vous en tant que débutant. Dans le cas où vous perdez l'un des outils, vous pouvez faire le tour pour un remplacement afin d'éviter d'arrêter votre œuvre fantastique.
4. Ne soyez pas dur avec vous-même, essayez des feuilles de triche
Si vous êtes un maniaque du jeu, vous savez ce que sont les feuilles de triche. Eh bien, ils rendent l'expérience de jeu incroyable et amusante. Quand il s'agit d'utiliser une machine Cricut, vous pouvez également utiliser les feuilles de triche. Il existe de nombreux blogueurs prêts à partager leurs feuilles de triche Cricut gratuites. Vous devez utiliser ces feuilles de triche lors de vos projets. Ils facilitent les choses lorsqu'ils sont utiles.
5. Utilisez le guide à l'écran
Comme pour la plupart des machines, Cricut vous guide tout au long du processus. L'outil vous guide de la toute première étape de chargement des tapis à la sélection des bonnes lames pour terminer la tâche. En tant que débutant, vous ne devez pas ignorer ces guides car ils peuvent vous aider à vous familiariser avec l'ensemble du travail.
Par exemple, ces guides à l'écran peuvent vous alerter chaque fois que vous choisissez la mauvaise lame de coupe. Recevoir un tel avertissement aide également à renforcer son courage alors que vous poursuivez la tâche en sachant que vous faites la bonne chose. En outre, cela aide à accélérer le processus. Vous pouvez également utiliser les didacticiels sur YouTube ou sur le site officiel de la plateforme. Ces didacticiels fonctionnent également comme par magie si vous vous sentez mal à l'aise avec tout ce que la machine offre.
6. Organisez votre espace d'artisanat
Le démarrage de votre premier projet peut être pénible. Les choses peuvent devenir désordonnées, surtout lorsque vous ne savez pas quel outil utiliser pour un travail spécifique. Eh bien, vous devez savoir qu'il faut un peu de temps pour connaître même les noms des outils dont vous avez besoin pour le travail. Il serait donc préférable que vous appreniez à vous organiser dès le départ.
La façon dont vous gardez votre espace de fabrication a un impact sur les résultats. À moins que vous ne souhaitiez consacrer une journée entière à travailler sur un seul projet, vous devez vous assurer que les outils utilisés sont organisés. Organiser votre espace d'artisanat ne permet pas seulement de gagner du temps, mais contribue également à réduire la perte de l'appareil.
Vous pouvez commencer par placer les outils que vous utilisez souvent à proximité et stocker les autres dans une zone différente. De plus, vous devriez avoir un bac pour vider tout le désordre que vous créez. Vider le terrain laisse le plaisir de l'espace autour. Vous pouvez consulter les blogueurs sur Internet pour des idées sur la façon d'organiser votre espace d'artisanat comme un professionnel.
7. N'ayez pas peur de faire des erreurs
Disons que vous avez décidé de créer une carte-cadeau comme premier projet. Si vous êtes un expert, c'est un travail que vous pouvez gérer même avec les yeux fermés. Mais, si vous êtes débutant, les choses peuvent ne pas fonctionner selon vos attentes. Alors, comment gérez-vous cela?
Une chose à noter est que pour apprendre quelque chose de nouveau, il doit y avoir des erreurs en cours de route. Par conséquent, vous ne devriez pas trop vous concentrer sur les erreurs. Les erreurs vous aident à devenir meilleur. Par conséquent, vous ne devriez pas vous mettre en colère chaque fois que vous jouez avec votre projet. Un jour dans le futur, vous regarderez en arrière et vous vous moquerez de ces petites erreurs que vous faites en ce moment.
8. Minimisez les déchets
Lors de la réalisation de l'illustration, vous devrez faire face à divers matériaux d'impression. Que vous créiez une carte-cadeau pour votre maman ou que vous souhaitiez créer un fantastique sticker mural pour votre salon, il y a un matériau pour cela. À moins que vous n'ayez tout l'argent du monde, vous devez vous assurer que vous utilisez ces matériaux au maximum. Bien que certains éléments soient bon marché, il serait préférable de les utiliser à bon escient.
Alors, comment pouvez-vous minimiser le gaspillage? Un moyen sûr de réduire le gaspillage est de vous familiariser avec le fonctionnement de la machine avant de vous lancer dans les projets. Comme indiqué précédemment, il existe des didacticiels pour vous aider. Vous pouvez également démarrer vos projets avec des matériaux bon marché. En tant que débutant, vos chances de faire une erreur sont élevées. Par conséquent, vous économiserez beaucoup lorsque vous commencez avec des matériaux abordables.
9. Votre famille voudra utiliser la machine
Si vous pensiez que vous étiez le seul à vouloir faire de l'art incroyable, attendez d'avoir acquis un fabricant Cricut. Une fois que vous avez déballé l'appareil, vous apprendrez que tout le monde, y compris vos enfants, voudra utiliser l'article. Eh bien, dans la mesure où créer de l'art est amusant, ils devraient également avoir un avant-goût de ce que cela fait.
Alors, comment gérez-vous la situation où tout le monde dans la maison veut utiliser la machine? Tout d'abord, ne soyez pas du genre jaloux et donnez à chacun la chance de créer cette œuvre d'art fantastique. Vous pouvez accompagner vos enfants lorsque vous réalisez votre tout premier projet. Apprendre à utiliser la machine devient encore meilleur lorsque la famille est impliquée. Vous ne le saurez peut-être jamais, un de vos enfants peut développer un hobby dans la création artistique à partir de ce moment.
Quand il s'agit de créer de vrais projets, vous devez vous assurer que les jeunes sont encadrés. En les supervisant, cela signifie que vous apprécierez le plaisir sans jouer avec vos appareils coûteux. De plus, les supervisions contribuent à minimiser le gaspillage de matériaux.
Conclusion
Il n'y a rien qui soit fantastique que d'acquérir votre première machine Cricut Maker. Toute l'imagination sur les œuvres d'art que vous êtes susceptible d'établir ne peut jamais être ignorée. Cependant, il vous apparaît lorsque la réalité vous frappe et que vous n'êtes pas en mesure de construire des projets conformément aux attentes. Pour les nouveaux utilisateurs, cela devrait être le moindre de vos soucis.
Quand il s'agit d'utiliser la machine, vous commencez quelque part. Vous trouverez dans cet article des idées sur la façon de démarrer votre premier projet comme un pro. En lisant l'intégralité de la pièce, vous apprendrez que la création d'œuvres à l'aide de la machine ne devrait pas être compliquée.
FAQs
Why is my Cricut not working properly? ›
Check the power supply and socket. Check for an update on Cricut Design Space. Log out of Cricut Design Space then back in. Check that nothing is stuck in any part of your machine if so carefully remove it.
Why can't I get my Cricut design space to work? ›This issue is usually resolved by resetting your Cricut ID password. Reset your password on this page. If you don't get a password reset email in a few minutes, contact Member Care.
Can you upload your own designs to Cricut Design space? ›Design Space gives you the ability to upload your own images and converts them into cuttable shapes. There are two different types of uploaded images: Basic and Vector. Basic Images, also known as raster images, include . jpg, .
How hard is it to learn how do you use a Cricut machine? ›It's easy to set up and use
After all, it's kind of like a printer, except with a blade. However, I was pleasantly surprised to find the machine sets up quickly and easily in just a few steps. Cricut Design Space walks you through the process, and you're ready to start creating in just a few minutes.
What is the best Cricut for a beginner? The best machine for a beginner on a budget is the Cricut Explore 3. The Cricut Explore 3 is Cricut's most popular machine, and for a good reason! It cuts over 100 materials: cardstock, vinyl, iron-on, and specialty materials like glitter paper, cork, and bonded fabric.
Is there a manual for the Cricut maker? ›Yes, the manual of the Cricut Maker is available in English .
Where is reset button on Cricut maker? ›- Power off the Cricut Imagine machine.
- Hold down the button below Menu, the button directly above Menu, and power all at the same time.
- Hold them until a rainbow screen appears, then release the buttons.
Open the Manage Custom Materials page through the Design Space menu and increase the pressure for your material setting by 2-4, then perform a test cut. You may need to increase the pressure settings 2-3 times by increments of 2-4 to see a change in the cut result.
How do I force unload my cricut? ›Press the Unload Mat button and then press the Load Mat button again. Press the Reset All button to clear all commands and then press the Load Mat button again.
How do you load and unload a cricut? ›- Select your Cricut Joy machine from the Connect machine drop-down.
- Select the right setting for your material. ...
- When material is selected, the light on top of the machine will blink, indicating it's ready to load your material.
- Using both hands, insert material under guides.
Will I lose everything if I uninstall Cricut design space? ›
For some issues, it may be necessary to uninstall the iOS app. However, if you have projects saved to your device that haven't been saved to the Cricut Cloud, uninstalling the app will also delete those projects and any images or fonts you have downloaded to the device.
Will I lose my projects if I uninstall Cricut design space? ›Your saved projects are also saved to the cloud so they are nice and safe on the Cricut server. If you go into Settings, you can bypass this. You would have to change the default settings to computer only. So unless you know you have done that, you are safe and you will not lose your projects.
Can Cricut print photos? ›No, a Cricut does not print images but the Cricut software will send the images to your home computer to print an 8.5×11 inch material. A print dialog box will pop up for you to select a printer and you can use the advanced options or use system dialog to select paper options and printer settings if you want.
Can I use images from Cricut Design Space to sell? ›Licensed Images
These are generally breaking copyright and you can get in trouble for using them. My advice? Stay far away from licensed images and fonts! And again, you cannot use licensed images from Cricut Design Space to sell, though you can use non-licensed images per their Angel Policy above.
Can I Make Money with My Cricut? YES, absolutely! There are many, MANY ways in which you can use your Cricut machine to start a profitable business! From making and selling products to teaching classes and leading workshops, we'll discuss a lot of different ways to make money with Cricut in this post for you!
Do you need a printer to use a Cricut? ›Since it is a cutting machine, the only instance when a printer isn't required is when you plan only to cut vinyl, paper, and other materials. Using a printer is a must if you're doing anything custom at home!
What exactly can a Cricut machine do? ›A Cricut is an digital die-cutting machine that is able to cut many different materials for you to use in a plethora of craft projects. You can cut materials such as paper, vinyl and with the correct cutting blades some Cricut machines can also cut balsa wood, fabrics, leather and cork.
What to buy when you first get a Cricut Maker? ›Cricut offers a few beginner kits, including a Basic Tool Set and an Essential Tool Set. These kits come with the most essential handheld tools, including tweezers, a weeding tool, scissors, a small spatula, scraper, a scoring stylus, and a paper trimmer.
Are Cricut machines hard to use? ›Cricut Design Space
And the software is going to be the most difficult thing to learn with any cutting machine. Out of all of them I've tried, Cricut is the most straightforward and easiest to use. There's still a learning curve for sure. That's why I recommend you go ahead and start playing around with it now.
In this free class, a Cricut Coach will walk you through a Paper Flower project. We'll cover how to work with images in Design Space, cut cardstock, assemble paper flowers, and how to embellish a project with paper flowers.
What tools can the Cricut Maker use? ›
Perforation Blade, Debossing Tip, Wavy Blade, and Engraving Tip. Check out this video to see how the versatile Cricut Maker uses four different QuickSwap tools to create one amazing project.
What is the basic Cricut machine? ›Cricut Explore One is the most basic and economical machine that Cricut currently offers. It has all of the precise cutting, writing, and scoring capabilities of the Explore Air machines, and you can cut all the same materials (there are more than 100!).
Where is Cricut machine settings? ›When a Cricut Explore 3 or Cricut Maker machine is connected to your computer or mobile device, the material settings appear as a series of tiles. If you see your material there, simply click or tap on the tile to select the setting.
How often do you need to replace Cricut blade? ›In general, 3-6 months is the average useful life of a Premium Fine Point blade in a Cricut Maker machine.
How do I know if my Cricut needs an update? ›Ensure your Cricut cutting machine is powered on and connected to your computer via USB cable or Bluetooth. Learn how to pair the Bluetooth here. You will receive an alert when a firmware update is necessary, whether it is during the new machine setup, or when proceeding to cut your current project.
Why is Cricut Design Space not updating? ›Disconnect your Cricut Maker or Cricut Explore from the computer and power your Cricut machine off. Once your Cricut machine is disconnected from your computer and powered off, restart your computer. When your computer has restarted, return to Design Space and attempt the firmware update process again.
What to do when Cricut freezes? ›Disconnect your Cricut machine from your computer/device and turn your Cricut machine off. Then, restart your computer/device. Next, reconnect your machine to your computer/device and wait a few moments, then open Design Space and attempt the process again.
How do you fix a jammed Cricut? ›Power the machine off, then manually move the carriage across the roller bar 3-4 times to clear out any debris that may have gathered. If this does not help, contact Member Care for further assistance.
What does detach mean on Cricut? ›Attach can also fasten a draw or score layer to a cut layer to tell the machine on which image layer the text or score line should be placed. Detach separates attached layers so they are no longer connected and will cut, draw, or score independently from all other layers.
Why is my Cricut not loading? ›Ensure that a cartridge is loaded in the machine, as the Load Mat button may not function if a cartridge is not loaded. If there is a cartridge in the machine, proceed to 3. Press the Unload Mat button and then press the Load Mat button. The Cricut may think that the mat is already loaded in the machine.
Why is my Cricut not connecting? ›
Ensure your Cricut machine is powered on and within 10-15 feet of your computer. From your Start menu, select Settings (gear icon) and then open the Devices option. Ensure that Bluetooth is ON and click Add Bluetooth or other device. Select Bluetooth and wait for the computer to detect your Cricut machine.
How do I troubleshoot my Cricut maker? ›- Turn your machine off completely, before turning it back on.
- Check the power supply and socket.
- Check for an update on Cricut Design Space.
- Log out of Cricut Design Space then back in.
- Check that nothing is stuck in any part of your machine if so carefully remove it.
Navigate to the My Projects page and select the three dots on the project tile you want to save. Then select Save for Offline. You will see a small computer icon on any of the project tiles that are successfully saved for offline use.
Why doesn t Cricut work with Chromebook? ›Design Space requires a Windows or Mac operating system. Chromebooks run Google's Chrome operating system, which is not compatible with Design Space.
What programs will allow Cricut Design Space to be used on? ›- Design Space. Cricut's own app is great for newcomers. ...
- Adobe Illustrator. The best Cricut software for artists. ...
- Inkscape. The best free Cricut software. ...
- Canva. The best Cricut software for lettering and stickers. ...
- CorelDRAW. ...
- Amadine. ...
- GIMP. ...
- Affinity Designer.
Clicking on the Action menu (three dots) in the bottom right corner of the project tile. Tap Edit to open the project in Edit mode. On the Project Details screen, tap the Action menu (three dots) on the right, under the project photos. Tap Edit to open the project in Edit mode.
Does Cricut have to be plugged into computer to use Design Space? ›To download and install the application, you'll need an internet connection. But once the application installed, you can choose to work offline any time.
Is a Chromebook good to use with Cricut? ›Google Pixelbook Go
Quite a high end Chromebook, the Google Pixelbook Go is perfectly compatible with Bluetooth and the Google Play Store, so using Cricut on this device shouldn't be a problem for keen crafters.
Go to the Chromebook play store and download the Cricut app called “Cricut Design Space”(obviously you must have a Google account to use this play store). Then you will see a window that you have to maximize and you are ready to use the app. This method is really great because you can use Cricut from your cell phone!
Can I use Cricut design space on multiple computers? ›Yes! Design Space for Desktop supports multiple windows so you can work on multiple projects at once. However, to cut, your machine only connects to one window at a time.
Which computer works best with Cricut? ›
- Apple. MacBook Air M2 2022. Check Price.
- Microsoft. Surface Pro 9. Check Price.
- Acer. Aspire 5. Check Price.
- Apple. MacBook Pro 14-inch (2021) Check Price.
- Lenovo. IdeaPad 3i. Check Price.
- Asus. Zenbook Pro 14 Duo OLED UX8402. Check Price.
- Microsoft. Surface Book 3 (13.5-Inch) View.
- HP. Pavilion x360. Check Price.
Apple iPad Air (5th Gen, 2022)
For Cricut uses this cheaper iPad model just pips in my list above the more costly and larger iPad Pro. Some may want to spend the extra for the Pro's larger 12.9-inch screen, but for the money and power the new iPad Air's 10.9-inch screen will suit most crafter's needs.